TA-2100 IR Infrared Hydrocarbon Gas Detector

Mil-Ram's New RS 485/4-20mA 3 or 4-Wire smarter Transmitter for LEL or %Volume Hydrocarbon Gas Detection. Hundreds of different hydrocarbon gases detected utilizing NDIR dual-chamber infrared sensor element. Now available suitable for use in SIL 2 environments.

Features: Infrared Hydrocarbon Gas Detector

no false alarms Infrared (NDIR) gas sensor technology

Self-Calibration adjusts span monthly based on sensor life curve

Auto-Gas Calibration, non-intrusive, hands-free, magnetic switches

Not affected by temperature -20 deg C to +50 deg C, stable by design

LCD display - 12 characters x 2 lines. Provides user interface with magnetic switches - no dip switches

Offsite sensor calibration with memory chip embedded in sensor

Peak value, 15-min. TWA, Remaining Sensor Life, Replace Sensor indication and number days since last gas calibration

Optional Relay Module in same enclosure with low, mid, high and fault relays

Can be used with Mil-Ram's Wireless Telemetry System

Available suitable for use in SIL 2 environments

Continuous advanced Diagnostics

Specifications: Infrared Hydrocarbon Gas Detector

Detection Range	0-100% LEL (lower explosive limit) or 0-100% Volume
Resolution	1% LEL or 1% Volume
Response Time	<30 sec to 90% of final reading
Recovery Time	<30 sec. to 90% recovery
Temperature Range	-20 deg.C to +50 deg.C
Humidity Range	0-95% RH, non-condensing, continuous
Zero Drift	<1% of full-scale
Power Requirement	12V or 15-30VDC; 1.82W @24VDC
Output	4-20mA linear. Optional Modbus RTU. Optional Relays; low, mid, high & fault.
Long life	>5 years typical under normal operating conditions

Hydrocarbon

LEL Infrared

Gas Detector

QUOTE REQUEST

TA-2100 IR Infrared Hydrocarbon Gas Detector

Features: Infrared Hydrocarbon Gas Detector

Specifications: Infrared Hydrocarbon Gas Detector