TA-2100 Hydrogen Fluoride HF Gas Detector

Mil-Ram's New RS 485/4-20mA 3 or 4-Wire smarter Transmitter for Hydrogen Fluoride HF Gas Detection. Sensor chemistry eliminates common interfering gases. Mil-Ram patented technology eliminates zero drift and corresponding false alarms. Now available suitable for use in SIL 2 environments.

Features: Hydrogen Fluoride Gas Detector

no false alarms Mil-Ram patented Hydrogen Fluoride HF gas sensor technology

Self-Calibration adjusts span monthly based on sensor life curve

Auto-Gas Calibration, non-intrusive, hands-free, magnetic switches

Not affected by temperature -25 deg C to +50 deg C, stable by design

LCD display - 12 characters x 2 lines. Provides user interface with magnetic switches - no dip switches

Offsite sensor calibration with memory chip embedded in sensor

Peak value, 15-min. TWA, Remaining Sensor Life, Replace Sensor indication and number days since last gas calibration

Optional Relay Module in same enclosure with low, mid, high and fault relays; rated 10 Amps. Gas alarm relays can be programmed latching or non-latching, energized or non-energized, time delays

Can be used with Mil-Ram's Wireless Telemetry System

Available suitable for use in SIL 2 environments

Continuous advanced Diagnostics

Specifications: Hydrogen Fluoride Gas Detector

Detection Range	0.0 - 20.0 PPM HF Gas
Resolution	0.1 PPM HF
Response Time	< 60 sec to 90% of final reading
Recovery Time	< 30 sec. to 90% recovery
Temperature Range	-25 deg.C to +50 deg.C
Humidity Range	10-95% RH, non-condensing, continuous
Zero Drift	< 0.1 PPM
Power Requirement	12V or 15-30VDC; 1.08W @24VDC
Output	4-20mA linear. Optional Modbus RTU. Optional Relays; low, mid, high & fault.
Long life	>3 years typical under normal operating conditions