|
» TA-2100 Transmitter
» TA-2102 Transmitter
» Control Panels
» Gas List
» Cal Kits
» Site Map
Data Sheet
Literature
» TA-2102 Transmitter
» Control Panels
» Gas List
» Cal Kits
» Site Map
Data Sheet
Literature
H2SO4 Gas
Detector
TA-2100 H2SO4 Sulfuric Acid Vapor Gas Detector
Mil-Ram's New RS 485/4-20mA 3 or 4-Wire smarter Transmitter for H2SO4 Sulfuric Acid Vapor Gas Detection. Sensor chemistry eliminates common interfering gases. Mil-Ram patented technology eliminates zero drift and corresponding false alarms. Now available suitable for use in SIL 2 environments.Features: Sulfuric Acid Vapor Gas Detector
| no false alarms Mil-Ram patented H2SO4 gas sensor technology |
| Self-Calibration adjusts span monthly based on sensor life curve |
| Auto-Gas Calibration, non-intrusive, hands-free, magnetic switches |
| Not affected by temperature -25 deg C to +50 deg C, stable by design |
| LCD display - 12 characters x 2 lines. Provides user interface with magnetic switches - no dip switches |
| Offsite sensor calibration with memory chip embedded in sensor |
| Peak value, 15-min. TWA, Remaining Sensor Life, Replace Sensor indication and number days since last gas calibration |
| Optional Relay Module in same enclosure with low, mid, high and fault relays |
| Can be used with Mil-Ram's Wireless Telemetry System |
| Available suitable for use in SIL 2 environments |
| Continuous advanced Diagnostics |
Specifications: Sulfuric Acid Vapor Gas Detector
| Detection Range | 0.0 - 20.0 PPM H2SO4 Gas |
| Resolution | 0.1 PPM H2SO4 |
| Response Time | < 60 sec to 90% of final reading |
| Recovery Time | < 30 sec. to 90% recovery |
| Temperature Range | -25 deg.C to +50 deg.C |
| Humidity Range | 10-95% RH, non-condensing, continuous |
| Zero Drift | < 0.1 PPM |
| Power Requirement | 12V or 15-30VDC; 1.08W @24VDC |
| Output | 4-20mA linear. Optional Modbus RTU. Optional Relays; low, mid, high & fault. |
| Long life | >3 years typical under normal operating conditions |
