TA-2100 Hydrogen Sulfide H2S Gas Detector

Mil-Ram's New RS 485/4-20mA 3 or 4-Wire smarter Transmitter for Hydrogen Sulfide H2S Gas Detection. Sensor chemistry eliminates common interfering gases. Mil-Ram patented technology eliminates zero drift and corresponding false alarms. Now available suitable for use in SIL 2 environments.

Features: Hydrogen Sulfide Gas Detector

no false alarms Mil-Ram patented Hydrogen Sulfide H2S gas sensor technology

Self-Calibration adjusts span monthly based on sensor life curve

Auto-Gas Calibration, non-intrusive, hands-free, magnetic switches

Not affected by temperature -40 deg C to +50 deg C, stable by design

LCD display - 12 characters x 2 lines. Provides user interface with magnetic switches - no dip switches

Offsite sensor calibration with memory chip embedded in sensor

Peak value, 15-min. TWA, Remaining Sensor Life, Replace Sensor indication and number days since last gas calibration

Optional Relay Module in same enclosure with low, mid, high and fault relays

Can be used with Mil-Ram's Wireless Telemetry System

Available suitable for use in SIL 2 environments

Continuous advanced Diagnostics

Specifications: Hydrogen Sulfide Gas Detector

Detection Range	0 - 50 PPM H2S Gas (other ranges)
Resolution	1 PPM H2S
Response Time	< 45 sec to 90% of final reading
Recovery Time	< 30 sec. to 90% recovery
Temperature Range	-40 deg.C to +50 deg.C
Humidity Range	10-95% RH, non-condensing, continuous
Zero Drift	< 1 PPM
Power Requirement	12V or 15-30VDC; 1.08W @24VDC
Output	4-20mA linear. Optional Modbus RTU. Optional Relays; low, mid, high & fault.
Long life	>3 years typical under normal operating conditions

H2S Gas

Detector

QUOTE REQUEST

TA-2100 Hydrogen Sulfide H2S Gas Detector

Features: Hydrogen Sulfide Gas Detector

Specifications: Hydrogen Sulfide Gas Detector