TA-2100 Carbon Monoxide CO Gas Detector

Mil-Ram's New RS 485/4-20mA 3 or 4-Wire smarter Transmitter for Carbon Monoxide CO Gas Detection. Stable electrochemical sensor technology eliminates zero drift and corresponding false alarms. Now available suitable for use in SIL 2 environments.

Features: Carbon Monoxide Gas Detector

no false alarms electrochemical Carbon Monoxide CO gas sensor technology

Self-Calibration adjusts span monthly based on sensor life curve

Auto-Gas Calibration, non-intrusive, hands-free, magnetic switches

Not affected by temperature -25 deg C to +50 deg C, stable by design

LCD display - 12 characters x 2 lines. Provides user interface with magnetic switches - no dip switches

Offsite sensor calibration with memory chip embedded in sensor

Peak value, 15-min. TWA, Remaining Sensor Life, Replace Sensor indication and number days since last gas calibration

Optional Relay Module in same enclosure with low, mid, high and fault relays

Can be used with Mil-Ram's Wireless Telemetry System

Available suitable for use in SIL 2 environments

Continuous advanced Diagnostics

Specifications: Carbon Monoxide Gas Detector

Detection Range	0 - 200 PPM CO Gas
Resolution	1 PPM CO
Response Time	< 45 sec. to 90% of final reading
Recovery Time	< 60 sec. to 90% recovery
Temperature Range	-25 deg.C to +50 deg.C
Humidity Range	10-95% RH, non-condensing, continuous
Zero Drift	< 3 PPM typical
Power Requirement	12V or 15-30VDC; 1.08W @24VDC
Output	4-20mA linear. Optional Modbus RTU. Optional Relays; low, mid, high & fault.
Long life	>2 years typical under normal operating conditions

CO Gas

Detector

QUOTE REQUEST

TA-2100 Carbon Monoxide CO Gas Detector

Features: Carbon Monoxide Gas Detector

Specifications: Carbon Monoxide Gas Detector