Relay Module: Network Installed

Mil-Ram's Network Relay Module is designed for use with any Mil-Ram Digital Control Panel including Model TA-2008MB, TA-2016MB and TA-2048MB; wall and rack mount configurations. One or more Relay Modules can be conveniently installed at any point on the Gas Detector Network to eliminate long wiring runs between Relays and field installed alarms/devices.

Features

Use with any Mil-Ram Digital Control Panel including Model TA-2008MB, TA-2016MB and TA-2048MB, rack or wall mounting.

Digital Control Panel provides alarm set points (low, mid, high) and channel assignment.

Four relays (SPDT), 10 Amp. Select energized/non-energized, latching/ non-latching function. Low, Mid, High and Fault Relays.

Can be installed at any point on Gas Detector Network. Up to 16 Modules per Network (Model TA-2016MB Control Panel). Up to 16 different zones. Conveniently install Relays at point of use. Eliminates long wiring runs between Relays and field installed alarms/devices.

Backlit 12 characters x 2 lines LCD display. Continuously scans Relays to provide energized/non-energized Relay status.

Simple, non-intusive address selection using magnet. No dip switches.

Enclosure: Explosion-proof, Cl I GR B,C,D-CSA/UL/FM.

Continuous diagnostics. Wireless Options (consult factory).

Specifications

Relay Rating	SPDT, 10 A @ 28VDC 12 A @ 120 VAC, resistive
Module Power Requirement	90 mA @24 VDC
Relay Designations	Low, Mid, High and Fault
Network Interface	RS-485 Modbus RTU, half-duplex
Enclosure	Copper-free aluminum, epoxy painted Explosion-Proof, Cl I GR B,C,D UL/FM/CSA