|
View List of the Gases Detected by Mil-Ram Technology Detectors
TOX-ARRAY 2100 3
or 4 -Wire Self-Calibration smarter TRANSMITTERS
MIL-RAM'S New RS 485/4-20mA 3 or 4-Wire smarter
Transmitter - TOX-ARRAY 2100
features Self-Calibration, Labor-Free auto
self-calibration adjusts span monthly based on life curve. Auto
Calibration - auto gas calibration in 2 minutes, non-intrusive,
hands-free, magnetic switches. Offsite Sensor only calibration
to replace sensors in the field without recalibration. Loop
Test. Four 12-15 Amp time delay relays
option in the same enclosure, latching/non-latching, energized/non-energized.
RS 485 Modbus RTU option can link 247 points on a pair of
twisted wires. Peak Value. Remaining
sensor life and replace sensor indicator. Diagnostics. Backlit
12 x 2 LCD display. Rapid Warm-Up. These Transmitters use
MIL-RAM'S no false alarms,
chemically selective Toxic, LEL and O2 patented TOX-ARRAY sensors
that do not react with air, have no zero drift, are not sensitive to changes
in temperature, humidity or pressure and stay awake when gas is absent.
Recovery is less than 30 seconds even when exposed to high gas levels
and have over three years no maintenance life for each factory charge.
Can be used with MIL-RAM'S Wireless Telemetry System.
The TOX-ARRAY 2100 - 3 or 4-Wire
smarter Transmitters
FEATURES
- no false alarms - does not react with changes in temperature, humidity or pressure.
- Patented TOX-ARRAY sensor technology.
- Does not drift - no autozeroing or adjustments required.
- Not affected by humidity - 5 % to 95 % relative humidity.
- Not affected by temperature -25 deg C to +50 deg C, or -40 deg C to +50 deg C is not temperature compensated; inherent design makes it stable.
- Maintains calibration for over six months - good practice dictates calibration be checked monthly.
- Maintenance free - no replenishment of electrolyte or water during 3+ years of normal life of each charge.
- Long life - over three years and is factory rechargeable over 20+ times at reasonable cost (exchange program).
- Fast response - 90% of reading in less than 30 seconds.
- Fast recovery - 90% recovery in less than 15 seconds.
- Not saturated by occasional high concentrations of gas in the work environment.
- Stays awake - does not go to sleep when it has not been exposed to gas for long periods of time.
- Chemically selective.
- Does not react with air.
- No LEL, methane, hydrocarbons, CO, CO2 gas interference.
- No sensor warm-up time.
- Zero and Span are not interactive.
NOTE: Specifications subject to change
without notice. |
Send comments to: sls@mil-ram.com
