|
View List of the Gases Detected by Mil-Ram Technology Detectors
MIL-RAM'S SAMPLE DRAW GAS DETECTION SYSTEM
The MIL-RAM Sample Draw Gas Detection System
can be used for areas that are too hot, too cold or inaccessible. The
Sample Draw System uses chemically selective no
false alarms patented Toxic, Combustible and Oxygen sensors
that do not react with air, have no zero drift, are not sensitive to
changes in temperature, humidity or pressure and stay awake when gas
is absent. Recovery is less than 30 seconds even when exposed to high
gas levels and have over 3 years no maintenance life for each factory
charge. Interferences typically encountered on other sensors are avoided
with the TOX-ARRAY sensors. The result is fast, accurate, and reliable
response with outstanding sensitivity and selectivity. Sensor performance
underlies the integrity of any detection system. Rely on MIL-RAM'S experience
to capably serve your detection needs.
The Sample Draw System can be used
with MIL-RAM'S new RS485/4-20mA 3 or 4-Wire Self-Calibration smarter Transmitter and
the 2-Wire Loop Powered smarter Transmitter which
both feature Self-Calibration,
Labor-Free auto self-calibration adjusts span monthly based on life curve, Auto
Calibration - auto gas calibration in 2 minutes, non-intrusive hands-free, Off-site sensor
calibration to replace sensors in the field without recalibration, Remaining sensor
life and replace sensor indicator, Loop Test, Peak Value, Diagnostics,
Rapid
Warm-Up, 12 x 2 LCD display
and more. The 3 or 4-Wire smarter Transmitter
offers two options - four 12-15 Amp time delay relays in the same enclosure option
and RS 485 Modbus RTU option.
Can be used with MIL-RAM'S Wireless Telemetry System.
NOTE: Specifications subject to change
without notice.
|
Send comments to: sls@mil-ram.com
