No False Alarms |
Does not react with air, changes in temperature, humidity and/or
pressure does not affect the sensor. |
| Does
Not Drift |
No auto zeroing or adjustments required. |
| Not
Affected by Humidity |
5% to 95% relative humidity. |
|
Not affected by Temperature |
-25 deg C to +50 deg C; is not temperature compensated, its inherent
design makes it stable. For NH3 and H2S: -40 deg C to +50 deg C.
|
|
Maintains Calibration for Over Six Months |
Good practice dictates calibration be checked monthly.
2 minutes gas calibration. |
| Maintenance-Free
|
No replenishment of electrolyte or water added during 3+ years of
normal life of each charge. |
|
Long Life |
Over 3 years and is Factory rechargeable over 20+ times at reasonable
cost. (Recharge program). |
|
Fast Response |
90% of reading in less than 30 seconds. |
|
Fast Recovery |
90% recovery in less than 30 seconds. |
|
Not Saturated |
By occasional high concentrations of gas in the work environment.
|
|
Stays Awake |
Does not go to sleep when gas is absent for long periods of time.
|
|
Chemically Selective |
No interference from hydrogen, combustibles, solvent vapors. |
|
No Gas Interference |
No LEL, methane, hydrocarbons, CO, CO2 gas interference. |
|
Warm-Up Time |
No sensor warm-up time required. |
|
Zero and Span |
Zero and Span are not interactive. |
Send comments to: sls@mil-ram.com
